I’ve been a Mac user for years, always buying used Macs for tinkering and doing work with. When I went off to school, I decided that it was time I got a new Mac, as I’d want to take advantage of WiFi, burning CDs, and doing things in more than 120MHz. This was a little more than 2 years ago. My two choices were the iBook and Titanium PowerBook. I decided to go with the iBook, due to the the PowerBook’s fragility and higher price. I figured that the money I saved I could put into more RAM and accessories.
A Brief History of this Particular iBook
After about 6 months, my iBook started acting up. Files would disappear off of the hard drive, and then minutes later, the machine would freeze. Rebooting was impossible, as the hard drive appeared corrupt. Booting from a CD was also a chore – 90% of the time it would either result in a freeze or not recognizing the CD (I tried everything, including OS 9, OS X 10.1, and 10.2. Shipping it off to Apple resulted in a new motherboard and hard drive.
Not a big deal, as my iBook was fixed. I had my data backed up, so I was only out my time. Two months later the same thing happened. The motherboard was again replaced and this time my iBook behaved. My iBook had had no trouble since then…or so I thought.
The Great Blackout of 2004
My iBook started waking up randomly when it was in its case (I kept it in sleep when I went short distances, like many other Apple laptop owners. I thought that the problem was caused by my keyboard protector being pushed down by the screen or a “wake for administrator access” setting turned on (I have AirPort). Looking back, it seemed to be a warning sign for a problem I did know existed, as the reed switch (which senses when the iBook is closed) is attached to the same wire. On 19 April, my iBook started behaving strangely when I closed the lid to put it to sleep (I usually did this method when I was going to move it and used the sleep command when I plan to leave it at the desk). When the lid was positioned at a certain angle, the backlight would shut off (anywhere in the 110-80 degree range), but the picture would remain on the screen. Later that day, the backlight stopped working completely.
After doing a search on Google, I found that this problem was quite common with iBooks after a few years of use and that a complete surgery would be necessary to fix it. The small cable that not only controls sleeping (the reed switch is attached to it), but also the backlight broke around the hinge. In short of trying to resolder the cable yourself, it seemed that this would have to be sent to Apple. Since my machine was out of warranty, Apple wanted to replace the entire screen and everything associated, adding up to quite a bit of money, and making a new Mac look like a better option.
Why not send it in with that warranty extension for the iBook screen problems, you ask? Well, my model, the Late 2001 version, was not affected by this and those repairs are motherboard related, which my problem was not.

A Cheap Fix
After putting the iBook on the back burner for awhile, and looking at the various Power Mac G4s as a replacement (we own one of these and it has been solid), I stumbled upon an Apple Discussion Board thread about this problem, and many were able to get the specific part for a mere $20 from Small Dog Electronics. I figured that I would give it a try and that in the worst-case, I’d be out $20. Apple Part #922-5017 was sent to me and I received it yesterday.
I completely dismantled my iBook and, sure enough, the inverter cable/reed switch component had 3 wires broken. After taking awhile to install the new one (I’ve got disassembling the iBooks down to an art, although I still long for the PowerBook 500 series’ “simplicity”), I now have a perfectly working iBook again, which I plan to keep in service as my main machine for awhile longer.
Kudos to Small Dog Electronics for providing me with the correct part and having superior service. I am disappointed in Apple for not acknowledging that there is a problem, although many other machines have had this happen, due to a poor design. Hopefully, this will be addressed in the near future, instead of the “your iBook is more than 2 years old, how about you replace it?” mentality that the computer world has. Of course, this once again proves that AppleCare or some sort or insurance (if it will cover failures) is an essential “accessory” to any laptop…I think I speak for many when I say that it your computer still works for what you need, why replace it?
For your reference iBook Modification at the University of Saskatchewan and PowerBook Tech have a complete disassembly of the white iBooks.
11 Responses to “The iBook’s Dirty Little Secret”
Leave a Comment
Please keep comments polite and on topic. For reviews, we ask that you give reasons to back up your comments. All required fields are marked with an asterisk (*). Although your email address is required, we do not sell them or use them in any other way (see our privacy policy). Finally, comments are moderated.


09/07/2006 at 2:13 pm
ok, it seems to me that i have the ssame problem with my ibook. i am going to try to do what you did and see if it will work. in the meant time it is great to have found your info.
01/07/2007 at 4:15 pm
My display is also been flickering on and off….but I don’t know if it is exactly the same reason. I notice that if I squeeze LEFT of the trackpad, the display comes back on. What’s located there…about an inche on the Upper left hand side of the track pad. Well, if i squeeze it – even just temporarily, the display light goes bright again. But, shortly thereafter, the dsiplay eventually goes slighter dimmer than I like.
Before I start disassembling my ibook, does this sound familiar?
Thanks fo ryour wonderful comments and information!
01/08/2007 at 8:59 pm
Anne,
I’m not particularly sure what’s troubling your iBook – in that area, it could be the video chip (depending on your iBook’s generation), and if you have an iBook G3, it’s probably that problem that Apple had with those. In the case of mine, a “temporary fix” was tilting the display, but the cable eventually broke fully and I had to replace it.
04/29/2007 at 6:58 am
hi.
interesting story and interesting find, because i have the same problem. did you follow a guide how to dismantle the iBook? care to share the link?
thanks again.
06/06/2007 at 3:10 pm
[...] iBook reed switch and display failures When my display started to go black except under very particular conditions of temperature and [...]
06/09/2007 at 8:09 pm
Anne: the problem you are having is evident of a loose/damaged GPU (graphics chip). About the only DIY fix for that is opening it up and putting a metal shim between the case and the GPU to help it stay put better. If it gets really bad, a logic board replacement is the only real solution. Sorry to be the bearer of bad news…
06/15/2007 at 12:25 am
It’s not necessary to replace a logicboard with a faulty GPU chip. The problem is due to fractured solder joints. Re-flowing the joints will fix the problem, however this isn’t possible with a regular soldering iron due to the design of the video chip. A company by the name of First Phase Tech is well aware of this specific problem and they will repair the logic board for $50. However, they only accept the logic board, so you’ll need to disasseble the computer yourself. First Phase Tech has a presence on eBay. Search for “iBook video repair”. Since I last used there services, another company has also established a presence on ebay offering the same type of service. It’s a cheap and reliable fix which actually fixes the problem rather than replacing one faulty part with another faulty part.
07/26/2007 at 7:04 pm
Hate to say it but it is not an actual fix it is mearly a patch and like the 5 my company sent to First Phase only one still works, my advise drop the ibook and move on unless you like taking yours apart and getting it repaired over and over.
12/14/2007 at 8:16 am
Hi,
I bought an iBook with the same problem…. it’s wierd how this happens !! does the GPU get melted ?! lol… anyways, after I put the iBook togehter before I put the white plastic bottom cover, I put a quarter on top of the square above the GPU, I put some thermal paste under the quarter so it stays in place and then closed it… it’s running fine now, the screen might go a lil dimm but a very small push fix it and it stays on!!
12/17/2007 at 3:42 am
villager, actually what you had happen is on the later iBooks where the GPU actually did become unsoldered from the logic board…there are various fixes out there, and Apple has even acknowledged this problem.
03/05/2008 at 7:15 pm
Hi, I have a ibook G3 and it has a problem with the resolution. Mainly when you look at pictures, and also half the screen will go to black and white but if i restart the computer it is fine. what should i do?